Pedestals for decking

Adjustable pedestal 25/40 mm for decking

The decking terrace pedestal is a support adjustable in height from 25 to 40 mm allowing the installation of wooden or composite terraces. The head of the L-shaped wooden terrace pedestal allows to receive the joist. A tab on the side of the head allows fix the joist on the pedestal using screws. The adjustment is made using the ring located under the pedestal head and allows height adjustment to the nearest millimeter.

EAN: 635131418105

Resistance:

Robust, the decking terrace pedestal supports up to 1 ton of load. It resists also to temperature variations from -40°C to + 60°C, frost, UV as well as acidic and chemical agents.

Manufacturing:

The YEED decking pedestal is made in France from polypropylene, environmentally friendly recycled and recyclable material.

Conformity:

YEED terrace pedestals comply with DTU 43.1 and 51.4.

Data sheet PDF

Pedestal Grid Calculator PDF

Installation guide

Use of the decking pedestal for terrace:

The decking pedestal is a support intended for pedestrian use compatible with blades in wood and composite.

Installation steps:
place the pedestals on soft ground at a regular distance (count 70 cmfor good spacing). Adjust the height of the pedestals and check the installation using a level. Then, place the joists on the head of the pedestals and screw them into the tongue provided for this purpose. Finish by placing and fixing the deck boards on the installation.

Note: do not use composite joists for the structure of the terrace on pedestals.

Other products

Adjustable pedestal 25/40 mm for decking

Use of the decking pedestal for terrace:

Adjustable pedestal 8/20 mm for decking

Adjustable pedestal 40/60 mm for decking

Adjustable pedestal 60/90 mm fo decking

Adjustable pedestal 90/150 mm for decking

Adjustable pedestal 150/260 mm for decking

Post pedestal 60/90 mm for wooden post 90x90mm

UNIKA adjustable pedestal for wood decking 30/40mm

UNIKA adjustable pedestal for wood decking 40/60mm