Pedestals for paving

Adjustable pedestal 60/90 mm for paving

The slab pedestal allows the creation of the foundations of a raised terrace. This support is designed to receive a slab, tile, ceramic or grating. Adjustable in height, the slab pedestal is manually adjusted from 60 to 90 mm in turning the red colored nut. The head of the pedestal is equipped with 4 lugs allowing keep the slabs in their place.
EAN: 635131418204


The slab terrace pedestal can withstand loads of up to 1 ton. Robust, it supports without deterioration temperature variations from -40°C to + 60°C, UV rays, frost as well as acidic and chemical products. The slab pedestal for terrace is compatible with a installation near a swimming pool.


Made in France, the YEED slab pedestal is environmentally friendly. It is made from polypropylene, a recycled and recyclable material.


YEED pedestals comply with current standards: DTU 43.1 and 51.4.

Use of the 60/90 mm terrace pedestal for paving:

The installation of a slab terrace on pedestal is both economical, easy and quick to achieve. The pedestal for tile is placed directly on the ground without requiring fixing. The latter must be stable and loose in order to to guarantee the solidity of the construction. No need to make joints, the studs allow to obtain a regular spacing of 3 mm between the tiles of the terrace.

The rules to follow for a slab terrace on pedestal:

  • use 1 pedestal per angle or 4 pedestals for a slab
  • if the tiles are very large, place a 5th pedestal in the center by breaking the studs using with a clamp
  • the coating used must be at least 2 cm thick.

For the installation of the slab pedestals start by placing the pedestals on the ground according to the size of the paving slabs. Then adjust the height of the pedestals and check the level of the installation. Finish by placing the tiles on the pedestals.